aqf-30 series ac/dc power module 30w e-mail:sales@minmax.com.tw tel:886-6-2923150 2012/11/14 rev:19 page 1 of 5 features ? fully encapsulated plastic case ? single-, dual- and triple output models ? 3 mounting versions: - pcb mounting with solder pins - chassis mounting with screw terminals - din-rail mounting ? universal input 85-264 vac, 47- 440 hz ? protection class ll ? safety approval to cul/ul/iec/en 60950-1 ? ul508 approval (option) ? over load and over voltage protection ? 3 year product warranty product overview the minmax aqf-30 series is a new range of fully encapsulated ac/dc power supply modu les. the product features emi-filter to en 55022, class b and ems compliance to en 61000-4 standard. universal input voltage 8 5-264vac and international safety approvals qualifies these pow er modules for applications in products with worldwide m arkets. for industrial applications, the mo dels for chassis mounting can also be suppl ied as option with ul508 approval.the aqf-30 series provide a cost effective solution for ma ny space critical applicati ons in commercial and industrial electronic equipment. model selection guide input current output current 115vac, 60hz efficiency (typ.) output voltage max. peak @max. load @no load max. capacitive load @max. load model number pcb mounting (for model with chassis mounting, add suffix c) vdc ma ma ma(typ.) ma(typ.) f % aqf-30s05 5 6000 --- 557 60 8000 78 aqf-30s12 12 2500 --- 543 60 3900 80 aqf-30s15 15 2000 --- 543 60 3900 80 aqf-30s24 24 1250 --- 543 60 1500 80 aqf-30s48 48 625 --- 543 60 1000 80 aqf-30d12 12 1300 --- 565 60 #1500 80 aqf-30d15 15 1000 --- 543 60 #1500 80 *5 3000 4500 3900 aqf-30d512 *12 1250 1800 572 60 1500 76 *5 3000 4500 2200 12 600 900 1500 aqf-30t512 -12 -600 900 572 60 1500 76 *5 3000 4500 2200 12 1000 1500 1500 aqf-30t512a -12 -250 500 572 60 1500 76 *5 3000 4500 2200 15 500 750 1500 aqf-30t515 -15 -500 750 572 60 1500 76 *5 4500 6000 2200 +3.3 1000 1500 2200 AQF-30T5312P +12 250 500 588 60 1500 71 *3.3 4000 5300 2200 +5 1500 2000 2200 aqf-30t3512p +12 250 500 483 60 1500 71 * output floating (note 6) # for each output
aqf-30 series ac/dc power module 30w e-mail:sales@minmax.com.tw tel:886-6-2923150 2012/11/14 rev:19 page 2 of 5 input specifications parameter model min. typ. max. unit input voltage range 85 --- 264 vac input frequency range 47 --- 440 hz input voltage range all models 120 --- 370 vdc 115vac --- --- 20 a inrush current (cold start at 25 ) 230vac --- --- 40 a output specifications parameter conditions min. typ. max. unit single / dual output --- 1.0 2.0 % vo1 --- 1.0 2.0 % output voltage accuracy dual positive / triple output vo2&vo3 --- 3.0 --- % line regulation vin=min. to max. --- 0.2 1.0 % single output models --- 0.5 1.0 % dual output models --- 2.5 5.0 % vo1 --- 2.5 5.0 % load regulation iout=min. to max. triple output models vo2&vo3 --- 4.0 --- % vo1 --- 2.0 --- % vo2 --- 5.0 --- % cross regulation- dual / triple output models vo3 measured output io = 20% to 100% of rated load other output(s) set at 50% of rated load --- 5.0 --- % 3.3v & 5vdc output models --- 1.5 1.8 %v pp of vo ripple & noise (20mhz) other output models --- 1.0 1.3 %v pp of vo single-,dual-output m odels and main output triple output models --- 10 --- %inom. minimum load auxiliary outputs of triple output models --- 20 --- %inom. over voltage protec tion zener diode clamp --- 120 --- % of vo temperature coefficient --- 0.02 --- %/ overshoot --- --- 5 % vout foldback, auto-recovery current limitation (long term overload condition may cause damage) 105 --- --- % inom. short circuit protection hiccup mode, indefinite (automatic recovery) general specifications parameter conditions min. typ. max. unit i/o isolation voltage input to output, 60 seconds 3000 --- --- vacrms i/o isolation resistance 500 vdc 100 --- --- m ? switching frequency --- 100 --- khz hold-up time --- 20 --- ms mtbf (calculated) mil-hdbk-217f@25 , ground benign 200,000 --- --- hours emc emission conducted and radiat ed en 55011 class b, en 55022 class b, fcc part 15 class b standard specification requirement performance criteria en61000-4-2 air 8kv cont. 4kv b en61000-4-3 80~1000mhz, 10v/m 80% am, 1khz modulation a en61000-4-4 ac port 2kv dc, sl, tl 2kv not less than 1 min. b en61000-4-5 1.2/50us(8/20 s) ac dif. 1kv dc 0.5kv b 0.15~80mhz, 10vrms (functional earth ports included) en61000-4-6 80% am, 1khz modulation b en61000-4-8 50hz/60hz, 30a/m a 30%, 10ms b emc immunity according en61000-6-1 en61000-4-11 60%, 100ms, 95%, 5000ms c protection class ii according iec/en 60536 cul/ul 60950-1,iec/en 60950-1 safety approvals (ul508 for models with order code suffix ice only) input fuse all models built-in fuse 3.5a / 250vac external fuse (recommended) 1.5a slow ? blow type
aqf-30 series ac/dc power module 30w e-mail:sales@minmax.com.tw tel:886-6-2923150 2012/11/14 rev:19 page 3 of 5 environmental specifications parameter conditions temperature range (oper ational) ambient -25 +70 power derating +50 to +70 1.125w / storage temperature range -40 +85 over temperature protection at 90 (automatic recovery at 67 ) cooling free-air convection humidity (non condensing) --- 95 % rel. h notes 1 all specifications typical at ta=+25 , resistive load, 115vac, 60hz input voltage and after warm -up time rated output curr ent unless otherwise noted. 2 ripple & noise measurement bandwidth is 0~20 mhz 3 these power modules require a minimum out put loading to maintain specified regulat ion, operation under no-load conditions wil l not damage the power supplies however they may not meet all listed specifications. 4 other input and output voltage may be av ailable, please contact factory. 5 peak current can't be drawn from all output at the same time. 6 floating (or isolated) output of a power suppl y that is not connected to any other output. 7 to order the module with cha ssis mount package, please add a suffix c (e.g. aqf-30s05c). 8 to order the module with ul508 safety, please add a suffix ice (e.g. aqf-30s05ice). 9 part number for din-rail mounting bracket: ac-din-02 10 specifications are subject to change without notice package specifications pcb mounting mechanical dimensions pin connections pin single dual (d12,d15) dual (d512) triple triple (t5312p,t3512p) 1 ac(n) ? ac neutral 2 ac(l) ? ac line 3 +vout +vout +vout2 +vout2 +vout2 4 no pin +vout1 +vout1 +vout1 5 -vout common -vout2 com. 2/3 com. 2/3 6 no pin -vout1 -vout1 -vout1 7 nc -vout nc -vout3 +vout3 nc: no connection ? all dimensions in mm (inches) ? tolerance: 0.5 (0.02) ? pin diameter ? 1.0 0.1 (0.040.004) physical characteristics case size : 88.9x63.5x21.7mm (3.50x2.50x0.85 inches) case material : plastic resin + fibergl ass (flammability to ul 94v-0 rated) pin material : copper alloy with gold plate over nickel subplate weight : 177g 26.75 27.5 [1.08] 55.88 [2.20] 63.5 [2.50] 81.3 [3.20] 88.9 [3.50] 15.24 12.7 31.45 [1.24] 7 6 5 43 1 2 5.0 21.7 6.0 1.0 [0.60] [0.50] 12.7 [0.50] 15.24 [0.60] [1.05] [0.24] [0.85] 0.7 [0.03] [ 0.04] [0.20] mounting m4.0 thread bottom view
aqf-30 series ac/dc power module 30w e-mail:sales@minmax.com.tw tel:886-6-2923150 2012/11/14 rev:19 page 4 of 5 package specifications chassis mounting (order code suffix c) mechanical dimensions connections termina l single dual (d12,d15) dual (d512) triple triple (t5312p,t3512p) 1 ac(n) ? ac neutral 2 ac(l) ? ac line 3 +vout +vout +vout2 +vout2 +vout2 4 nc +vout1 +vout1 +vout1 5 -vout common -vout2 com. 2/3 com. 2/3 6 nc -vout1 -vout1 -vout1 7 nc -vout nc -vout3 +vout3 nc: no connection ? all dimensions in mm (inches) ? tolerance: x.x0.5 (x.xx0.02) x.xx0.25 ( x.xxx0.01) ? pin pitch tolerance: 0.25 (0.01) physical characteristics case size : 112.0x63.8x25.6mm (4.41x2.51x1.01 inches) case material : plastic resin + fibergl ass (flammability to ul 94v-0 rated) weight : 191g package specifications with din rail mounting bracket (order code ac-din-02) mechanical dimensions physical characteristics case size : 112.0x63.8x25.6mm (4.41x2.51x1.01 inches) case material : plastic resin + fibergl ass (flammability to ul 94v-0 rated) weight : 245g 92.0 [3.62] 100.0 [3.94] 112.0 [4.41] 63.8 [2.51] 50.0 [1.97] 4 x 3.5 top view 1 2 3 4 5 6 7 10.0 [0.39] 5.0 [0.20] 16.8 [0.66] 25.6 [1.01] indication led power " good " indicator 92.0 [3.62] 100.0 [3.94] 112.0 [4.41] 63.8 [2.51] 50.0 [1.97] 4 x 3.5 top view 1 2 3 4 5 6 7 10.0 [0.39] 5.0 16.8 [0.66] 25.6 [1.01] [0.20] 11.0 [0.43] 3.0 [0.12] indication led power " good " indicator
aqf-30 series ac/dc power module 30w minmax technology co., ltd. 18, sin sin road, an-ping industr ial district, tainan 702, taiwan tel: 886-6-2923150 fax: 886-6-2923149 e-mail: sales@minmax.com.tw 2012/11/14 rev:19 page 5 of 5 din-rail mounting kit
|
